|
|
125 Discussion Forum
Please note: This forum is read by a wide group of 125 sailors.
This is not the place for personal attacks or inappropriate comments on anyones race, sex, age or sailing abilities.
Return to the Forum List  new masts | I was just wondering if somebody could tell me, where to get and how much a new mast section is please. And whether or not they are anodized or natural finish.
Thanks Matt
| |
| | Re: new masts | Your local state division will have stock of masts, booms, spinnaker poles and Stiffeners , have a look on the contacts page and contact either the president or stockist. They will also be able to help it with setting up the mast.
The G-James section we use in QLD is clear anodised. You are welcome to paint or anodize your mast any colour you wish (as long as your 'black bands' are clearly visible)
Good Luck
| |
| | Re: new masts | The bands shall be clearly discernabled whilst sailing, not less than 20mm wide. There is no requirement for the bands to be black.
| |
| | Re: new masts | The Victorian Association has a stock of new masts, booms and spinnaker poles which can be collected from East Kew in Melbourne.
The costs are :
Masts $180
Booms $100
Spinnaker Poles $35
also.....
Keeley Marine Supplies supply unanodised sections to a very high temper for $224 plus GST (as at 10/9/07). Keeley's part number is KO2.
Keeley Marine Supplies (AKA Light Spars of Australia)
6 Horscroft Place Moorabbin Vic 3189
Ph 95554622
| |
| | Re: new masts | Are stocks of masts still available at the Vic Association/ East Kew? Is there a number I can call?
| |
| | Re: new masts | Peter, contact Robert McQuade on (03) 9859 2558 . Yes there are still masts available. Note that the prices shown are for members of the 125 association - Victorian division. Non members pay an additional $30 for a mast
| |
|
Return to the Forum List Add a message to this discussion
Measurer's Forum
Committee's Forum
|
|
